Synth
Stretch SLS Grafix
- Stretched acoustical ceilings digitally printed for the first time
- 1.5m widths with adjacency printing for large images (>1.5m)
- Lights can highlight the graphics
| Parameters | Specifications |
|---|---|
| Type | Non-Grid |
| Finish | Fabrics |
| Core | Polyester (Trevira CS), Polyfibre |
| Thickness (mm) system | 25 |
| Size* (m) width | 1.5 |
| Density (Kg/m3) | na |
| Weight (g/m2) | na |
| Fire (Class) | A |
| NRC | Upto 1 |
| Thermal (W/mk) | 0.1 |
| Climate (0C, RH) | 50, 90 |
| Light (%) | 80 |
| Green (VOC, RC%) | Low, 0 |
| Warranty (Years) | 10 |
| Maintenance | Vacuum, Dry Shampoo |
| Install Accessories - Ceiling | Skelet T24 OR Strut SA25, WC25, MC45, CC25 AND Strand Primer, SynthPF, Strut SE25 by Anutone. |
| Install Accessories - Panelling | Strut CC10|CC25|CC50, SynthPF, Stick S7, Strand Primer, Strut SE25 by Anutone. |
| Remarks | Small quantities are gently ‘dropped’ in cartons, not rolled|folded to avoid wrinkles. ‘Lift’ gently and use wisely. SLS is see-through hence use white tissue to cover the substrate if air-gap >25mm in-between is not possible. Be careful of first trials of air-conditioning when moisture condensation and system dust may stain Stretch SLS fabric systems. Mask before trials or dry shampoo later. |
*Midseams will be visible as super-thin joint-lines for adjacency printed large images
Stretch SLS Grafix in feminine floral prints for an upscale gentlemen’s club